Issue

The messages Waste Tank Full or Waste Tank Near Full appear and your franking machine will not print.

Cause

Sensors in your franking machine detect that the Waste Tray, also known as an Ink Pad or Waste Tank is full or nearly full of ink.

The Waste Tray is a foam sponge that sits in the drawer underneath your franking machine and collects excess ink.

Resolution

Watch this video or follow the instructions below to learn how to clear the error.

1. Remove the waste tray from the back of the franking machine by sliding the light blue switch to the right and pulling out the waste tray.
   
   
   Important: If the sponge (ink tray) is completely covered with ink, contact Technical Support.
2. Replace the ink tray.
   
3. Press Clear/Back to clear the error.
   Important: The message will clear when you press Clear, but the issue is not yet resolved.
4. Press Menu/Options.
5. Press Review (down) until Use Ink Functions? appears.
6. Press Enter/Yes.
7. Press Review (down) until Replace Ink Tray appears.
8. Press Enter/Yes. Install Ink Tray? appears.
9. Press Enter/Yes. Enter in Code From Instructions: xxxx appears.
10. Enter the code ..57 (dot, dot, 5, 7).
11. Press Enter/Yes.
12. Press Enter/Yes at the New Waste Tray Installed? screen.

If the message does not clear or if the Waste Tray foam is fully saturated, contact Technical Support.

If you need further assistance, please contact us.