Use these instructions if your franking machine needs a Static IP Address to connect to the Pitney Bowes Data Centre.
Products affected: DM110i™, DM160i™, DM220i™ (PR20)
Use these instructions if your franking machine needs a Static IP Address to connect to the Pitney Bowes Data Centre.
- Press Options.
- Press Page Down twice.
- Select Connect - Data Centre.
- Select LAN Settings.
- Select Get IP.
- Select Manually.
- Select IP Address/IP Addr. Enter your static IP address. Enter the complete IP address, including the decimal points separating the IP address parts. If one or more sections contain less than 3 digits, use zeros to fill. For example 192.168.1.25 should be entered as 192.168.001.025.
- Press Enter or Accept to confirm.
- Select Subnet Mask/Subnet. Enter your subnet mask settings in the same way as the IP address.
- Press Enter or Accept to confirm.
- Select Default Gateway/Gateway. Enter your default gateway in the same way as the IP address.
- Press Enter or Accept to confirm.
- If requested, press Enter again to confirm.
- Press Home to return to the Home screen.
Comments
0 comments
Please sign in to leave a comment.