Note: In order to add postage to your franking machine, you must have funds available in your PB Postage™ Account.

1. Access the Funds application using one of the following methods:
   • Select Funds on the Home screen.
   • Select Postage in meter at the bottom of the Run Mail screen.
   • Select Add Postage to Meter or Refill My Meter when you receive a low funds warning or an insufficient funds error.
2. On the Funds screen, select the Meter Funds tab, then select Add Postage to Meter or Refill My Meter.
3. Select the appropriate refill amount option:
   1. To add the same postage amount that was used during the last refill, select Last refill amount.
   2. To add the default postage amount, select Default refill amount.
   3. To add a different postage amount, select Other amount. Enter the refill amount and select OK.

Note: The maximum and minimum postage refill amounts for your system are listed on the Meter information tab.

4. When prompted, select Confirm. The system connects to Pitney Bowes, 
5. If you want to print a receipt, select Print receipt:
   1. To print the receipt on an envelope, place an envelope of the feed deck, and select Start.
   2. To print the receipt on a piece of tape, select Tape.
   3. If you have an optional attached printer, select Print on document.
6. Select Done to exit the Funds application.

Related Topic

• Troubleshooting connection issues